Warranty: 3 Year / Unlimited Miles
Part No. FEN35LR-HD
Fully Refundable Core Deposit
Shipping the engine to you and us picking your core up
Why Choose Fraser Advantage Over Standard Rebuilds?
When it comes to revitalizing your engine, the choice between a standard rebuild and the Fraser Advantage is the choice between ordinary and extraordinary. Here’s why you should elevate your driving experience with Fraser Advantage:
Precision Redefined:
Enhanced Durability:
Exclusive Valve Optimization:
Premium Component Selection:
Comprehensive Gasket Overhaul:
Tailored Finishing:
In essence, Fraser Advantage is not just a rebuild; it’s a transformation. It’s a commitment to excellence, precision, and durability that goes beyond the standard. Choose Fraser Advantage for an engine that doesn’t just run – it roars with power, reliability, and an unrivaled level of craftsmanship. Elevate your driving experience – choose Fraser Advantage.
This remanufactured Nissan 3.5L engine includes the following enhancements from Fraser Engines:
Nissan 3.5L Engines
The Nissan 3.5L (VQ35DE) is a V6 engine designed specifically for vehicles from the Nissan Motor Corporation.
The base engine consists of:
The engine specifications include:
Nissan sparked a revolution in 2001 with the release of its VQ35DE engine, which found its home initially in their Pathfinder and Infiniti Q4X SUV models. But it wasn’t until two years later when many car lovers got behind the famous powerplant: following an update by Nissan for use on 350Zs and G35s, drivers around North America praised the motor’s performance so much that Ward’s included it on their list of 10 best engines from 2002 to 2007! In response to this resounding approval, Renault decided to put modernized versions of said engine onto most cars they produced during this period.
The Nissan 3.5L is used in various Nissan applications, including the Pathfinder, Altima, Maxima, 350Z, Murano, and Quest. It was also used in the Infiniti QX4, I35, G35, FX35, and M35.
Metric | Value |
---|---|
Engine family | VQ35DE |
Displacement | 3.5 liters |
Aspiration | Naturally aspirated |
Configuration & cylinders | V6 configuration, six cylinders |
Vehicle engine orientation | Longitudinal |
Valve configuration | Overhead valve (OHV) |
Assembly sites | Japan |
Predecessor | Nissan VQ30DE |
Successor | Nissan VQ37VHR |
3 YEAR NO FAULT WARRANTY – $249.00
5 YEAR NO FAULT WARRANTY – $349.00
TINWARE (Oil Pan, Timing Cover, Oil Sump) – $349.00
ADD PREMIUM INSTALLATION KIT – $249.00
INSTALLATION KIT INCLUDES:
Vehicle | Transmission | Drive Wheels | Power@ RPM | Torque (lb-ft) @ RPM |
---|---|---|---|---|
Nissan 350Z (2002 – 2009) | Six-speed manual | RWD | 287 @ 6,200 | 274 @ 4,800 |
Infiniti G35 Coupe (2003 – 2007) | Five-speed automatic | RWD | 275 @ 6,200 | 268 @ 4,800 |
Infiniti G35 Sedan (2003 – 2006) | Five-speed automatic | RWD | 280 @ 6,200 | 270 @ 4,800 |
Nissan Altima 3.5 SE (2002 – 2006) | Five-speed automatic | FWD | 250 @ 5,800 | 249 @ 4,400 |
Nissan Murano (2003 – 2007) | Continuously Variable | AWD | 245 @ 5,800 | 246 @ 4,400 |
Infiniti FX35 (2003 – 2008) | Five-speed automatic | AWD / RWD | 280 @ 6,200 | 270 @ 4,800 |
Nissan Maxima (2002 – 2008) | Continuously Variable | FWD | 255 @ 5,800 | 252 @ 4,400 |
Infiniti M35 (2006 – 2008) | Five-speed automatic | RWD | 275 @ 6,200 | 268 @ 4,800 |
Nissan 350Z Roadster (2004 – 2009) | Five-speed automatic | RWD | 287 @ 6,200 | 274 @ 4,800 |
Nissan Quest (2004 – 2009) | Five-speed automatic | FWD | 240 @ 5,800 | 242 @ 4,400 |
3 Year / Unlimited Miles
Use conventional or break-in oil (non-synthetic) for the first 600 miles of operation. Do not drive for long periods at any single speed, always vary your speed. Do not tow a trailer or put other heavy loads on the vehicle. Check the engine oil and coolant levels daily.
At 600 Miles change the engine oil and filter using conventional (non-synthetic) oil. Check fuel and ignition settings; adjust valves (where applicable).
After the first 5,000 of service synthetic engine oil may be used. Follow your vehicle owner’s manual for service intervals.
Metric | Value |
---|---|
Bore | 95.5 mm |
Stroke | 81.4 mm |
Compression ratio | 10.3:1 |
Max power @ RPM | 287 hp @ 6,200 rpm |
Max torque @ RPM | 274 lb-ft @ 4,800 rpm |
Cylinder head | Aluminum |
Cylinder block | Aluminum |
Camshaft drive | Chain |