Here’s another great Fraser Engine Co. DIY (Do It Yourself) tip about changing the gas-filled struts that help to open and hold your hood, rear hatch, rear window, and trunk from slamming down on you.
The struts we’re talking about are gas-filled (usually Nitrogen), pistons, similar to shock absorbers, but these types of struts provide lift assistance and are tuned to keep the attached item suspended until closed manually.
Unfortunately, dirt and excessive heat can cause Nitrogen to leak from a gas-strut eventually causing failure.
If your hood or hatch doesn’t stay open during cold weather, it’s time to replace the struts. Nitrogen gets thinner in cold weather, and if it’s leaking from your struts, the reduction will cause this weakened behavior in cold weather but may possibly still operate normally during the following warm season. Be aware though, you should certainly replace them at the first sign of failure because the following cold season, they could fail completely.
Lift-support struts are available at any auto store. They come in two flavors, hood and tailgate. Be aware that tailgate struts are usually more expensive because of their length and the increased materials needed to make them.
If you’re not handy, just have the exact make and model of your vehicle and the part-store associate should be able to find the right item.
If you ARE handy, remove one strut and bring it to the store with you. Often there are different “grades” of struts capable of lifting different loads. A good practice is to get a strut that has a little stronger lift capacity (up to 30%) while being the same length. (Take a look at the Striker Engineering Hood Strut example photo to the LEFT.) The only caveat comes into play if you have a motor-controlled tailgate. We recommend having a professional do any work on this type of vehicle mechanism.
Making a quality choice at an auto-parts store will be limited, but ordering your “beefier” strut online is a breeze.
You don’t “need” to replace both, but it’s good practice. If you know, without a doubt, that only one strut is failing, you can do a single replacement.
For detailed instructions on how to perform a replacement, we would refer you to YourMechanic.com’s how-to article.
Special thanks to Striker Engineering for the photos used in this article.
Hey there, car aficionados! If you’ve ever dabbled in the world of car repairs or you’re simply a Ford lover, you might’ve heard the term
Badass by design, this Autobot is a six-wheel fire-fighting titan in real life Sentinel Prime draws his power from a Rosenbauer America Panther 6×6 Fire
Your Ford Ranger is more than just a vehicle. It’s a companion for both the everyday city drive and the adventurous off-road excursion. To keep
Featuring A Genuine, Fully-Functional Lexus 2054 Concept Car In this film, the car will certainly outlast the star! The Lexus 2054 is a movie concept
Issue 6 • Engine & Transmission Tip Here at Fraser Engines, we build a LOT of engines, and of course, we know about engine oils
Hey Mustang enthusiasts! You already know that driving a Ford Mustang isn’t just about going from point A to point B; it’s an experience, an
