Part Type: Remanufactured Engine Assembly (Factory Spec)
This Chevy/GMC/Cadillac 4.8L/5.3L/6.0L/6.2L engine is remanufactured with the HIGHEST QUALITY PARTS AVAILABLE and includes the following enhancements from Fraser Engines:
- Bore and hone all cylinders to OEM clearances (We check all clearances within .0001 of inch),
- Decking cylinder head(s) and block for straightness,
- Cutting valve seats and valves to proper degree,
- Line boring/honing crankshaft/camshaft tunnels,
- Ground & polish crankshaft, new or remanufactured camshaft(s),
- New main bearings, rod bearings, pistons, piston rings, lifters, pushrods (if equipped), timing components, oil pump, head bolts,
- All new internal gaskets and seals.
- All finishing gaskets are included (MAY VARY PER APPLICATION).
Chevy/GMC/Cadillac 4.8L/5.3L/6.0L/6.2L Engines
The Chevy/GMC/Cadillac 4.8/5.3/6.0/6.2 Liter DOD/AFM Delete Engines are V8 engines designed for use in General Motors vehicles.
The base engine consists of:
An all-aluminum engine block and cylinder head
Overhead Valve (OHV)
Variable Valve Timing (VVT)
Sequential multi-port fuel injection
The engine specifications include:
- 4.8 Liter engine has a displacement of 293 cubic inches (4,806 cubic centimeters)
- 5.3 Liter engine has a displacement of 325 cubic inches (5,328 cubic centimeters)
- 6.0 Liter engine has a displacement of 364 cubic inches (5,967 cubic centimeters)
- 6.2 Liter engine has a displacement of 376 cubic inches (6,162 cubic centimeters)
- 3.78 in x 3.26 in (96.0 mm x 83.0 mm), 3.78 in x 3.62 in (96.0 mm x 92.0 mm), 4.00 in x 3.62 in (101.6 mm x 92.0 mm) or 4.06 in x 3.62 in (103.25 mm x 92.0 mm) cylinder bore and piston stroke depending on the specific engine
- 9.8:1, 10.0:1, 10.4:1, or 11.5:1 compression ratio depending on the specific engine
- 302 to 403 horsepower (225 to 301 kW) at 5,200 to 6,200 rpm depending on the specific engine
- 305 to 417 lb-ft (413 to 565 Nm) of torque at 2,800 to 5,200 rpm depending on the specific engine
The Chevy/GMC/Cadillac 4.8/5.3/6.0/6.2 Liter DOD/AFM Delete Engines are well-known for their power and reliability. They are used in various GM applications, including the Chevy Silverado, Tahoe, Suburban, and Express, the GMC Sierra, Yukon, and Savana, and the Cadillac Escalade. The engines are designed with efficiency in mind, incorporating technologies like Active Fuel Management (AFM) and Displacement On Demand (DOD) to conserve fuel during highway cruising. However, some enthusiasts choose to delete these features to increase performance and reliability. With their range of sizes and capabilities, the Chevy/GMC/Cadillac 4.8/5.3/6.0/6.2 Liter DOD/AFM Delete Engines are a popular choice for truck and SUV enthusiasts.
