1-Year No-Fault Warranty
$99.00
- One-time free replacement, no matter the cause of failure.
- Unlimited miles during the 1-year term.
- Labor covered at $50.00/hr (Mitchell or AllData book time).
This unit requires a returnable core (your old engine block & heads). Fraser Engines will arrange free core pickup at no additional cost. The core deposit may be waived for up to 15 business days when the engine is shipped directly to a licensed repair facility. If the engine is shipped to a private residence, the core deposit must be paid upfront.
This unit is IN STOCK
⛟ Shipping is FREE to commercial address! $125.00 to a private residence.
Order before 3PM EST and receive your order in 2-3 business days! – some exclusions apply.
3 Year / Unlimited Miles parts and labor
Every Fraser Engines remanufactured transmission is built, tested, and validated to deliver dependable performance, long service life, and smooth operation under real-world driving conditions.
What’s Included & How We Ensure Quality
A remanufactured and improved torque converter is included with every transmission at no additional cost.
To prevent front seal leaks, vibration, and premature bushing wear, all torque converters are thoroughly tested for leak integrity, lock-up operation, concentricity, and balance.
Every fully remanufactured valve body receives complete system correction and recalibration, then is tested independently prior to installation.
All wear-prone valves are restored to stringent specifications and vacuum tested to verify proper sealing and operation.
Each remanufactured transmission undergoes hot, cold, load, and simulated road testing using our proprietary CARS® (Computer-Aided Road Simulation) dynamometer program, replicating real driving conditions before release.
Warranty You Can Trust
All Fraser Engines remanufactured transmissions are backed by an industry-leading, no-hassle nationwide warranty, providing real protection and peace of mind long after installation.
What even is a NO FAULT Warranty and why would I need it if the engine already has a warranty for free? –Click to View Standard vs NFW protection breakdown
1-Year No-Fault Warranty
$99.00
2-Year No-Fault Warranty
$199.00
3-Year No-Fault Warranty
$299.00
4-Year No-Fault Warranty
$399.00
5-Year No-Fault Elite
$499.00
Labor reimbursement uses published Mitchell or AllData times. One-time replacement applies per covered unit during the elected term.
Fraser Engines Premium Dexron® Transmission Fluid is specially formulated to protect and optimize your transmission during the most critical phase of operation—initial installation and early service life. Engineered to meet Dexron specifications, this high-performance automatic transmission fluid delivers superior lubrication, thermal stability, and friction control to ensure smooth shifting, long component life, and dependable performance.
Trusted by transmission builders and recommended by Fraser Engines technicians, this fluid helps prevent premature wear, overheating, and shift irregularities that can occur during startup and break-in of a newly installed transmission.
✔ Meets Dexron® performance specifications
✔ Promotes smooth, consistent shifting
✔ Reduces friction and internal wear
✔ Protects clutches, bands, and valve body components
✔ Helps maintain proper operating temperatures
✔ Ideal for newly installed or serviced automatic transmissions
Highly recommended for all applicable Fraser Engines transmission installations to protect your investment and ensure reliable performance from day one.
⚠️ Important Compatibility Notice
This transmission fluid is not compatible with all transmissions. Fluid type requirements vary by vehicle make, model, year, and transmission design. Always verify the correct transmission fluid specification for your application before installation. Use of an incorrect fluid may result in improper operation or damage. When in doubt, contact Fraser Engines for confirmation prior to use.
| Year(s) | Make | Model | Engine | Drivetrain / Notes |
|---|---|---|---|---|
| 2006–2007 | Honda | Accord | 3.0L V6 (J30) | FWD automatic |
| 2005–2008 | Honda | Odyssey | 3.5L V6 (J35) | FWD minivan application |
| 2006–2008 | Honda | Pilot | 3.5L V6 (J35) | FWD models only |
| 2004–2006 | Acura | TL | 3.2L V6 (J32) | FWD automatic |
| 2005–2006 | Acura | MDX | 3.5L V6 (J35) | FWD variants only |
When your Honda or Acura vehicle needs a replacement MJBA automatic transmission, you want far more than a used take-out or a minimal rebuild. The MJBA transmission is a fully engineered automatic designed for V6 powerplants, and any replacement should match or exceed factory standards for durability, smooth shifting, and long-term performance. Fraser Engines remanufactures MJBA transmissions from the case up with precision components, thorough testing, and real warranty protection — giving you confidence and reliability on every mile.
Fraser Engines has built a reputation for delivering industry-leading remanufactured drivetrains, and our MJBA transmissions are engineered to perform like new while correcting known wear points that often plague high-mileage units.
A remanufactured MJBA transmission from Fraser Engines is not simply resealed or partially repaired — it is completely rebuilt, restored, and tested to perform like new. Every unit includes:
✔ Complete teardown and inspection of all internal components
✔ Updated torque converter included with every transmission
✔ Precision remanufactured valve body with full system correction and recalibration
✔ All wear-prone valves restored to stringent OEM specifications
✔ New gaskets, seals, bearings, and bushings installed throughout
✔ Updated clutches and friction components for long life
This thorough remanufacturing process ensures proper hydraulic pressure, smooth gear engagement, and enhanced longevity compared to used or lightly rebuilt alternatives.
Every remanufactured MJBA transmission from Fraser Engines is tested extensively before it leaves our facility. Using our proprietary Computer-Aided Road Simulation (CARS) dynamometer system, each unit undergoes:
🔹 Hot operational testing
🔹 Cold start and low-temperature testing
🔹 Load simulation under driving conditions
🔹 Torque converter lock-up and shift pattern validation
This rigorous process replicates real-world driving conditions and ensures reliable performance from day one.
The MJBA transmission is used in select Honda and Acura applications (Accord, Odyssey, Pilot, TL, MDX with 3.0–3.5L V6 engines). Because Honda/Acura has multiple transmission variants depending on year, engine, and drivetrain, Fraser Engines verifies your VIN before shipment to guarantee the correct MJBA configuration — eliminating fitment errors and unnecessary delays.
Fraser Engines stands behind every MJBA transmission with real, robust warranty coverage — not just parts-only protection.
✔ Nationwide parts & labor warranty (program dependent)
✔ Claims handled directly by Fraser Engines — no third-party runaround
✔ Labor reimbursement available per industry standard book time
This level of coverage gives you peace of mind long after installation — even under heavy use.
When you buy a remanufactured MJBA transmission from Fraser Engines, you’re supported by transmission experts — not resellers or marketplace brokers. Our team provides:
✔ VIN-verified fitment support
✔ Pre-sale technical guidance
✔ Installation support as needed
✔ Dedicated post-sale warranty and customer care
One trusted contact from purchase through installation and beyond.
A remanufactured MJBA transmission from Fraser Engines delivers:
✅ True ground-up remanufacturing — not used or partial rebuilds
✅ Corrected wear points and updated components
✅ Real-world dynamometer testing
✅ VIN-verified fitment accuracy
✅ Industry-leading warranty with labor coverage
✅ Expert support from drivetrain professionals
📞 Need help verifying fitment or pricing?
Call 800-731-3177 and speak with a Fraser Engines specialist today.