FRASER FRHP109 Chevy LQ4 6.0L Base Engine 505HP

$ 5499

00

Fully Refundable Core Deposit - $560.00
Round Trip Shipping - $300.00
Warranty Included - 2 Year / Unlimited Miles

PART NUMBER: FRHP109

This engine was designed to be a performance upgrade for LS based vehicles or perfect for a 2001-2007 Chevy Truck LQ4 or LS swap in a hot rod. Expect big mid to upper end power, will have a noticeable idle. For optimal Performance you will need headers, chassis dyno tune and 36lb injectors.

This engine is a direct replacement for the 2001–2007 Chevy 6.0L LQ4 engine. Important Installation Notes:

ECM Tuning: The ECM must be tuned to ensure proper engine function. Skipping this step can lead to engine damage.
PCV System: A PCV valve is required for optimal performance.
Air-Oil Separator: We recommend using an air-oil separator, such as the Moroso #85487, to capture excess crankcase vapors commonly produced by LS engines.
MAP Sensor Settings: If you are not using a MAP sensor, set the MAP timing option in the timing control box to zero across the board. This prevents the controller from adding timing, which could otherwise cause detonation.
Steam Line Kit: A steam line kit, preferably a 4-corner setup like the Trick Flow #TFS-306SB601, is required to allow air pockets and hot spots to escape from the heads. This setup should connect to your water pump, radiator, or radiator hose and can also be used to purge trapped air when filling the radiator initially.

Following these guidelines will help ensure reliable performance and longevity for your engine.

Total: $5499.00 + Core + Shipping

Optional Warranty Add-Ons

3 Year NO FAULT WARRANTY

3 Years / Unlimited Miles NO FAULT Warranty

One-time guaranteed replacement, regardless of the cause of failure.

Your Cost: $449.00

5 Year NO FAULT WARRANTY

5 Years / Unlimited Miles NO FAULT Warranty

One-time guaranteed replacement, regardless of the cause of failure.

Your Cost: $799.00

Discription

Engine Specifications:
• HP: 505
• TQ: 480
• Block: OE LQ4/6.0L Iron
• Bore/Stroke: up to 4.040” x 3.622”
• Displacement (cu.in): up to 371
• Crankshaft: OE GM 24 tooth reluctor wheel
• Rods: OE powder metal or Stock GM
• Pistons: Hypereutectic 10:1 compression
• Rings: Moly
• Camshaft: Hyd. Roller
• Cam Specs: Custom performance grind
• Timing Chain: OE single roller
• Cylinder Heads: OE cathedral port aluminum 71cc/210cc 2.00/1.55
• Rocker Arms: 1.7 Ratio
• Oil Pump: Melling STD Volume

Recommended Components:
• Flexplate/Flywheel: Stock internally balanced
• Balancer: Stock internally balanced/per application
• Intake Manifold: Stock EFI intake or Aftermarket
• Water Pump: Per application
• Fuel Pump: Stock electric
• Fuel Injectors: 36lb injectors
• Spark Plugs: NGK #3186
• Spark Plug Wires: Factory
Engine Info:
• Oil: Conventional / Non Synthetic 10W30
• Oil Filter: Wix or K&N
• Timing: Set to factory specifications via PCM module (ECM TUNING REQUIRED).
• Spark Plug Gap: .040”
• Firing Order: 18726543
• Octane: 91+
• Stall Converter: 1800+
• Exhaust: 1 5/8 + Headers (Per application – Larger diameter will make more power)