1-Year No-Fault Warranty
$99.00
- One-time free replacement, no matter the cause of failure.
- Unlimited miles during the 1-year term.
- Labor covered at $50.00/hr (Mitchell or AllData book time).
This unit requires a returnable core (your old transmission). Fraser Engines will arrange free core pickup at no additional cost. The core deposit may be waived for up to 15 business days when the engine is shipped directly to a licensed repair facility. If the engine is shipped to a private residence, the core deposit must be paid upfront.
This unit is IN STOCK
⛟ Shipping is FREE to commercial address! $125.00 to a private residence.
Order before 3PM EST and receive your order in 2-3 business days! – some exclusions apply.
3 Year / Unlimited Miles parts and labor
Torque Converter
Install Guide: 1
• Heavy-Duty pump recalibration and shift kit reduces slippage and increases durability.
• Reverse planetary pinion pins are TIG-welded to eliminate OE design flaw.
• Upgraded low diode increases durability.
• Low-Reverse clutch Tough spring retainer updated to prevent clutch failure.
• Upgraded pressure solenoids improve consistent line pressures.
• Completely remanufactured pumps with new line bore bushings eliminate leaks and provide superior flow and durability.
• Fully remanufactured torque converter is tested for leaks, lock-up, concentricity, and balance. Upgrades exceed OE requirements and eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
• Bushings and machined surfaces polished to a mirror-like OE finish of 15 RA or less.
• Tru-Flat qualification process applied to transmission case, valve body, pump, and channel plate prevent cross leaks and pressure losses.
• All-new custom-spec bushings to improve internal fluid flow control and pressures.
• Every transmission is cold-and hot-tested using a proprietary dynamometer testing program that includes fully synthetic automatic transmission fluid and a filtration system.
Every Fraser Engines remanufactured transmission is built, tested, and validated to deliver dependable performance, long service life, and smooth operation under real-world driving conditions.
What’s Included & How We Ensure Quality
A remanufactured and improved torque converter is included with every transmission at no additional cost.
To prevent front seal leaks, vibration, and premature bushing wear, all torque converters are thoroughly tested for leak integrity, lock-up operation, concentricity, and balance.
Every fully remanufactured valve body receives complete system correction and recalibration, then is tested independently prior to installation.
All wear-prone valves are restored to stringent specifications and vacuum tested to verify proper sealing and operation.
Each remanufactured transmission undergoes hot, cold, load, and simulated road testing using our proprietary CARS® (Computer-Aided Road Simulation) dynamometer program, replicating real driving conditions before release.
Warranty You Can Trust
All Fraser Engines remanufactured transmissions are backed by an industry-leading, no-hassle nationwide warranty, providing real protection and peace of mind long after installation.
What even is a NO FAULT Warranty and why would I need it if the engine already has a warranty for free? –Click to View Standard vs NFW protection breakdown
1-Year No-Fault Warranty
$99.00
2-Year No-Fault Warranty
$199.00
3-Year No-Fault Warranty
$299.00
4-Year No-Fault Warranty
$399.00
5-Year No-Fault Elite
$499.00
Labor reimbursement uses published Mitchell or AllData times. One-time replacement applies per covered unit during the elected term.
Fraser Engines Premium Dexron® Transmission Fluid is specially formulated to protect and optimize your transmission during the most critical phase of operation—initial installation and early service life. Engineered to meet Dexron specifications, this high-performance automatic transmission fluid delivers superior lubrication, thermal stability, and friction control to ensure smooth shifting, long component life, and dependable performance.
Trusted by transmission builders and recommended by Fraser Engines technicians, this fluid helps prevent premature wear, overheating, and shift irregularities that can occur during startup and break-in of a newly installed transmission.
✔ Meets Dexron® performance specifications
✔ Promotes smooth, consistent shifting
✔ Reduces friction and internal wear
✔ Protects clutches, bands, and valve body components
✔ Helps maintain proper operating temperatures
✔ Ideal for newly installed or serviced automatic transmissions
Highly recommended for all applicable Fraser Engines transmission installations to protect your investment and ensure reliable performance from day one.
⚠️ Important Compatibility Notice
This transmission fluid is not compatible with all transmissions. Fluid type requirements vary by vehicle make, model, year, and transmission design. Always verify the correct transmission fluid specification for your application before installation. Use of an incorrect fluid may result in improper operation or damage. When in doubt, contact Fraser Engines for confirmation prior to use.
The 5R110 transmission is a five-speed automatic transmission developed by Ford Motor Company, designed for heavy-duty trucks and high-torque applications. Known for its robust build and smooth shifting performance, the 5R110 is commonly found in Ford’s Super Duty trucks and other large vehicles. This transmission is built to handle demanding conditions, including towing, off-road driving, and high-performance applications, delivering excellent reliability and power management.
Optimized Gear Ratios:
High Torque Capacity:
Durable and Advanced Design:
Integrated Cooling System:
Electronic Control Systems:
The 5R110 transmission is commonly found in Ford’s Super Duty line of trucks and other heavy-duty vehicles. Some of the vehicles that use the 5R110 include:
The 5R110 transmission is designed for those who need durability, power, and performance from their vehicles. It is particularly suited for drivers who need to tow heavy loads, navigate off-road conditions, or drive vehicles that require high torque and load-handling capabilities.
At Fraser Engines, we offer high-quality remanufactured 5R110 transmissions that meet or exceed OEM standards. Here’s why customers choose Fraser Engines:
Industry-Leading Warranties:
Enhanced Components:
Rigorous Testing Standards:
Flexible Financing Options:
If you notice any of the following signs, it may be time to replace or rebuild your 5R110 transmission:
Looking for a reliable remanufactured 5R110 transmission? Fraser Engines offers high-performance remanufactured solutions at competitive prices. Whether you need a replacement for your Ford Super Duty, F-250, or Excursion, we have the right solution for your needs.
📞 Call Us Today at 800-731-3177 or visit our website to explore our inventory of remanufactured 5R110 transmissions tailored to your vehicle’s needs.
What vehicles use the 5R110 transmission?
How much torque can the 5R110 handle?
Is the 5R110 transmission reliable?
Can I upgrade my 5R110 transmission?